Braced Post Insulators are insulators used for sub-transmission lines. Orient Power can supply these transmission line insulators as per standards or requirement meeting the following features, materials and other details.
Braced Post Insulators Features:
A = 1.5" (38mm) (not included) pole connection offset
B = Brace Length
C = Brace Angle
H = Assembly Height (Tolerance= =/-3")
SSL = Suspension Section Length
PSL = Post Section Length
Braced Post Insulators Material:
Standard Strength Braced Posts
2.0" Line Post Insulator (1 each)
25klb Suspension Insulator (1 each)
SYC-56 Socket Y-Clevis (1 each)
ASH-55 Anchor Shackle (2 each)
Turnbuckle
2.5" Line Post Insulator (1 each)
36klb Suspension Insulator (1 each)
ASH-56 Anchor Shackle (2 each)
Braced Post Insulators items:
A = 1.5" [38mm] (not included) pole connection offset
B = Brace Length
C = Brace Angle
H = Assembly Height (Tolerance = +/-3")
SSL = Suspension Section Length
PSL = Post Section Length
MDCL = Max Design Cantilever Load (Load Curves provided upon request)
Electrical Data is derived from the assembly "Strike Distance", without Corona Rings for 161kV and below. For Insulators 230kV & higher, All 230kV Braced Post assemblies supplied with a corona ring (Electrical Values include the corona ring).
HS = High Strength design. Brace SML = 36k
These Series supplied with standard G2-0 Bendable Gain Base on line post
For Flat Base, See line post base section for details
Customized Designs include any dimensional changes, strength changes, hardware changes, end fitting changes, gain to flat base changes, etc.
Relative Articles:
◆Baroda bushing & insulator
◆High voltage pin insulator drawings and specifications
◆ANSI porcelain post insulator for substations
◆Porcelain Long Rod Insulator
◆Disc Insulators
◆Hollow insulators