Chemical Earthing Material is used in power and telecom industry to protect from electric shocks. Earthing material is highly preferred for features of dimensional accuracy, properly galvanized and high tensile strength.

GI Earthing Electrode:
We are engaged in offering GI Earthing Electrode, which is widely available at cost-effective range. Our experts thoroughly test these products on certain quality-testing parameters that we instilled in our infrastructure.
These products have gained encored appreciation among our client base owing to certain features listed below:
High tensile strength
Dimensional accuracy
Corrosion resistance
Copper Earth/ Earthing Electrodes which is manufactured using the most premium quality circular rods of low carbon steel for a high tensile strength and durability
We adhere to the specifications of Underwriters Laboratories (UL) 467-2007 and the copper earthing electrode is accordingly molecularly bonded with the exterior of the rod. It is highly effective and widely appreciated for its functionality among our clients.

Chemical Earthing Details:
UL
Diameter: Minimum 20.0 mm
Length: Minimum 1, 2, 3 meters
Copper bonding thickness: 250, 500, 750, 1000 microns,
Maintenance free
High strength rod
Corrosion resistant
Low resistance path to earth
Cost effective
Earthing Pipe/Lightning Arrestor/Gel Earthing Electrode

A typical Lightning Arrester, also called Surge Arrester, comprises a high voltage terminal made of Copper of Aluminum mounted on top of a building. It is electrically connected to the ground terminal through a wire to protect the building in the event of lightning. If lightning strikes the building, it will preferentially strike the lightning rod and be conducted harmlessly to ground through the wire, instead of passing through the building where it could start a fire or cause electrocution. Lightning arresters can be commonly seen mounted on tall buildings, monuments, towers, water tanks etc.

A very important point worth noting in this regard is that a lightning arrester or lightning protection system as a rule never stops the action and effects of lightning. However, it provides ample protection and insurance against the damage to the building and electrical devices. Our lightning arresters are a guarantee to this. Earthing Pipes :
Also called Pipe Electrodes, these are used widely in power transmission applications. Our hot dip GI and Copper earthing pipes with funnel are robust in construction, easy to install and durable in performance provide good earthing. These are fabricated using premium quality raw material and are available in sizes like16, 20,25mm dia rod, 46mm Dia, 57mm dia , 75mm dia and 88mm dia pipes, in lengths varyng from 1 meter to 3 meters or as desired. Our pipe electrodes are accurate in dimension, corrosion resistant and high in tensile strength.
Lightning protection systems.
Prevention of accidents caused by static charge and stray currents
Protection of central communications, electronics, and AC power systems
Meeting grounding safety requirements for electrical substations
Ground fault neutralization
Safeguarding critical instrumentation and process control equipment
HOW TO INSTALL GEL EARTHING ELECTRODE:
It is recommended to install in clay or highly humid soil.
Make a pit preferably of 6-8 inches dia upto appropriate length of Gel Earthing Electrode.
Put them in vertical positions in the pit with the connection terminal on the top.
It is recommended to fill back-fill-compound surrounding of Gel Earthing Electrode mixed with proper water pouring simultaneously.
Normally 2 bags of back-fill-compound is recommended for our Gel Earthing Electrode but in some case i.e., Rocky Area, bag can be varies.
Make joint with suitable copper wire/strip or G.I. wire/strips carry for earthing from your equipment etc. upto the earthing terminals provide on the top of the Gel Earthing Electrode. Beware, don't hash on the while handling and installation, do not use hammer etc.
Put the chamber with the cover over the Gel Earthing Electrode & even petroleum jellyon the exposed part of Gel Earthing Electrode i.e., terminal.
Do proper water pouring upto 6-7 days after Installation

Relative Articles:
◆Transmission line insulators
◆Poleline hardware
◆Composite Cross Arm Tower
◆Protection fittings
◆Insulator fittings
◆Butt jointed grading rings