Orient-Compression Type Tension Clamp Assembly

Compression Type Tension Clamp Assembly for 7/3.15 mm is one kind of Compression Type Tension Clamp Assembly. The Technical Data is shown in the following and more details please contact Orient.

Compression Type Tension Clamp Assembly for 7/3.15 mm Technical Data:

Desc.	Material	Surface Treatment	Qty.
Anchor Shackle	Forged Steel-I/IV, IS:2004	H.D.G.	2
Steel dead end	Mild steel, IS:2062	H.D.G.	1
Jumper	Mild steel, IS:2062	H.D.G.	1+1
Outer Al. Sleeve	Al. (99.5% pure)	-	1
Filler Al. Sleeve	Al. (99.5% pure)	-	2
Plain Washer M12	Mild Steel, IS:2062	H.D.G.	1
Spring Washer M12	Spring steel, IS:4072	E.G.	2
M12 Bolt & Nut	Mild Steel, IS:1367	H.D.G.	2
M16 Bolt & Nut	Mild Steel, IS:1367,5,6	H.D.G.	2
Plain Washer M16	Mild Steel, IS:2062	H.D.G.	2
Split pin	Stainless Steel	-	2

Slipping strength of clamp assembly not less than 95% of UTS of earth wire
Breaking strength of hardware assembly 70kN
Fittings shall conform as per drawing
All ferrous parts shall be hot dip galvanised as per BS 729
Purity of aluminium - 99.5%
All dimensions are in mm.
General tolerance 3%
Total weight - 3.0 kg approx

Relative Articles:
◆Double Tension String Assembly for Quad ACSR Moose with Turn Buckle
◆Double Tension String Assembly for Quad ACSR Moose without Turn Buckle
◆Single Tension String Assembly ACSR Single Zebra with Turn Buckle
◆Tension with Arcing Horn
◆Normal Single Suspension String
◆Single Suspension String Assembly

Previous：Flexible Copper Bond

Next：OPGW damper