Ground / bond

Ground / bond are a kind of pole line hardware. There are many types of ground or bond clamps, and the materials, pictures, features, and other details about them are introduced in the following content.

Ground / bond  Ground / bond  Ground / bond  Ground / bond  

Ground / bond details:
Clamp: Ductile Iron, Hot Dip Galvanized
Hardware: High Strength Steel, Hot Dip Galvanized
Used to attach ground wires at the nut end of bolts on transmission lines
Includes two (2) 1-1/2" long clamp sections and one (1) square nut.
Material: Hot Dip Galvanized
MPS Ground Rod Clamps are designed for heavy duty ground connections to galvanized ground rods.
The clamp assembly consists of a stainless steel hex-head bolt and a hot dip galvanized clamp body.
Accomodates 5/8" diameter ground rods
Material: Ductile Iron - Hot Dip Galvanized
Used to bond the cable sheath to the messenger strand
The clamp body is made with an inside keeper riding on the end of the bolt
The 1/2" bolt can be removed to place the clamp over the messenger wire
The clamp body is made of 1-1/2" x 3/16" steel
Material: Steel - Hot Dip Galvanized
Features: Used to clamp ground wire to 5/8 and 3/4-inch rods.
Material: Steel - Hot Dip Galvanized
The assembly consists of two clamp sections and a 5/16" x 7/8" bronze hex washerhead bolt.
One clamp section is tapped to allow installation with a single wrench
Material: Bronze with tin plating
MPS Bronze Ground Rod Clamps, used with copperbonded ground rods, provide a low resistance, secure copper-to-copper connection. These heavy-duty clamps develop a high-pressure contact between the rod and the grounding wire and can be easily disconnected when it is desired to measure resistance of the ground.
Material: Bronze
Accomodates .16" to .38" ground wire diameter range
The J771018 grounding lug assembly consists of a 3/8" x 1-1/4" carriage bolt, complete with wire clamp, spring lockwasher and square nut
All components are Hot Dip Galvanized.
MacLean galvanized steel bond clamps provide a sturdy and efficient provision to connect ground wire to threaded bolts. The clamps are designed to nest over the square nut of the bolt. The grounding connection is accomplished by inserting the ground wire between the nut and the bonding clamp and adding an additional nut to secure the clamp and ground connection. The clamps accommodate the most common range of ground wire diameters.

Relative Articles:
AS pin type insulators
BS type Shackle insulator drawings and specifications
Hydraulic overlap joint Splicing Sleeve for ACSR Conductor
FFJQ type Twin-Spacer Damper
Guy-Grip Dead-End Clamp
Y-type socket clevis

  • Previous:Guy Attachments
  • Next:Brace
  • Orient is an international line post insulator manufacturer and supplier of high quality porcelain line post insulators and porcelain pin post insulator.
    Copyright ©Zhengzhou Orient Power Co., Ltd. All Rights Reserved.     sales@orientinsulators.com     Tel: +86 13673997131