Guy Attachments include Guy Hooks, Multiple, Combination, Pole Eye Plates, and Deadend Tee. All these guy attachment products are pole line fittings, and their features and materials will meet your requirement.

Guy Attachments:
Guy Hooks:
Features:
Guy Attachments provide an economical and efficient means of fstening guys to poles
Well rounded wire grooves protect the strand from damage
The formed steel style guy attachments feature a closed strand loop
Application:
Wherever possible, installation should be made under the head of a machine bolt
Guy Attachments are not recommended to be mounted on the threaded end of a bolt as tensile and bending stresses on bolt threads can result in premature bolt failure less than the bolt minimum tensile strength
Material: Hot Dip Galvanized
Features:
These guy hooks feature integral teeth in the bottom base which eliminate the need for a lag screw in the base.
Application:
Whenever possible, installation should be made under the head of a machine bolt
Guy hooks are not recommended to be mounted on the threaded end of a bolt as tensile and bending stresses on bolt threads can result in premature bolt failure less than the bolt minimum tensile strength.
Features:
These guy hooks feature a base with integral teeth
Hole for installation of a 1/2-inch diameter lag, provides additional resistance to movement
Features:
Corrosion resistant aluminum alloy with integral teeth in base bottom to resist movement
Material: Aluminum Alloy
½" lag screw or ¾" through bolt may be used in bottom hole
Material: Ductile Iron; Hot Dip Galvanized
Features:
Two J1019 guy hooks are normally mounted on opposite sides of a pole under two turns of guy strand to prevent the strand from slipping on the pole. The rounded side of the 1-3/4 x 3/8-inch half oval steel prevents damage to the guy strand and its galvanized coating.
Material: Hot Dip Galvanized
Features:
For use with formed guy grips, "bail type" automatic deadends, and "bail type" wirevise deadends
Material: Hot Dip Galvanized

Multiple, Combination:
Features:
Combination type guy attachments provide flexibility to terminate guy wire or fiberlass guy strain insulators
For use on round surfaces
Material: Ductile Iron; Hot Dip Galvanized

Pole Eye Plates:
Material: Ductile Iron, Hot Dip Galvanized
Features:
GE-66 is supplied with integral anti rotation spur
Material: Ductile Iron; Hot Dip Galvanized
Features:
Wide variety of mounting hardware options
Bottom mounting base will accomodate an additional 3/4" diameter through bolt or two 1/2" diameter lag screws
Includes integral spurs to resist movement
Material: Ductile Iron; Hot Dip Galvanized

Deadend Tee:
Features:
Available with either flat mounting base (DET series) or curved mounting base (DETR series)
Used for high strength, pole connection interface to clevises, thimble clevises, insulators, shackles and other deadend attachments.
For use on wood, steel, concrete or fiberglass poles
Material: Steel - Hot Dip Galvanized

Relative Articles:
◆Horn holder type ball eye
◆Clevis eye
◆Yoke plates
◆Live Part Cover
◆Tension Assembly
◆Tension with Arcing Horn