PDF
Oil or SF6 transformer dry type termination

Oil or SF6 transformer dry type termination is used for oil or SF6 transformer. The bushing or tube made of epoxy is the main insulating part of it. The drawing and other details are as follows.

Oil or SF6 transformer dry type termination drawings and application:

Oil or SF6 transformer dry type termination applicationOil or SF6 transformer dry type termination

Oil or SF6 transformer dry type termination details:
It is improved on tradition termination to meet new requirements of electric system and assembly dimensions of it comply with IEC60859 or 62271-209 @ IEC2007 .Please Note it in order.
It is suitable for Cable cross section: 95 - 2500mm2and oil or SF6 transformer.
The epoxy bushing of Ankura-Y JZGGCB can be installed and debugged beforehand. The only need on site is to install the termination. There is no need to pump in or out air,saving plenty of time .
The facility and the termination can be tested respectively. It is easy testing after finishing cable system installation and checking fault.

In addition to the drawings, example of application and other details of Oil or SF6 transformer dry type termination shown above, you also can get the electrical performance and installation dimension of Oil or SF6 transformer dry type termination by contact Orient Power.


Relative Articles:
Baroda bushing & insulators
BS pin type insulators
BS type Shackle insulator drawings and specifications
ANSI porcelain post insulator for substations
Bracket

Orient is an international line post insulator manufacturer and supplier of high quality porcelain line post insulators and porcelain pin post insulator.
Copyright ©Zhengzhou Orient Power Co., Ltd. All Rights Reserved.     sales@orientinsulators.com     Tel: +86 13673997131